BFMLT - GC-408 CLASS A

Export as PDF
Product Identification

Product ID:GC-408 CLASS A
MSDS Date:01/01/1985
FSC:8030
NIIN:00-723-5343
MSDS Number: BFMLT

Responsible Party
GOAL CHEMICAL SEALANTS CORP
3137 E 26TH ST
LOS ANGELES, CA 90023-4206
US

Cage: 04011

Contractor
GOAL CHEMICAL SEALANTS CORP
LOS ANGELES, CA 90023-4206 US

Telephone: 213-269-0461

Cage: 04011

Ingredients

POLYSULFIDE POLYMER

Fraction By Weight: 53.7%


CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 26.8%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 13.4%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 5.68%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


STEARIC ACID

CAS: 57-11-4

RTECS: WI2800000

Fraction By Weight: 0.24%

Hazards

Effects of Overexposure:EYE,SKIN:IRRITATION;INHALE:DIZZINESS DUE TO
TOLUENE

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR;SKIN,EYES:FLUSH WITH LARGE AMOUNTS
OF WATER;INGESTION:ADMINISTER EMETIC.CALL PHYSICIAN.NOTE:WASH SKIN
AFTER EACH USE WITH SOAP AND WATER.

Fire Fighting

Flash Point:77F,25C OC
Extinguishing Media:CO*2, H*2O,ETC.
Fire Fighting Procedures:NO SPECIAL PROCEDURES
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS

Accidental Release

Spill Release Procedures:GENERAL CLEAN-UP SCRAPE UP EXCESS MATERIAL,
CLEAN RESIDUE W/SOLVENT

Handling

Handling and Storage Precautions:STORE BELOW 80F

Exposure Controls

Respiratory Protection:RECOMMENDED-SOLVENT VAPORS. USE NIOSH/MSHA
APPRVD RESP DEVICE
Ventilation:MFR RECM LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:NO SPECIAL EQUIP. BESIDES ABOVE
Supplemental Safety and Health
PART A OF TWO PART PRODUCT(BASE INGREDIENTS:SYNTHETIC RUBBER);TYPE
II,CLASS A-2;UNIDENT INGRED:0.18%;DRYING TIME VARIES FROM
0.5-2HRS,BASED UPON AMT OF CATALYST ADDED;SEE DATA UNDER PN IND
B.KEY1:J1.

Chemical Properties

HCC:F3
Spec Gravity:1.47
Appearance and Odor:LIGHT TO DARK GRAY WHEN MIXED; MERCAPTAN

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMP. ABOVE 300F
Hazardous Decomposition Products:SO*2,H*2S,AND OTHER SULFUR COMPOUNDS

Disposal

Waste Disposal Methods:MFR RECM GENERAL TRASH DISPOSAL.DISPOSE IAW
FED., STATE & LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.